The ‘H33’ Type 3 valve manifolds are designed for direct mounting to differential pressure transmitters, with separate isolation for LP and HP inlets plus equalising valve for simple calibration. Each needle valve head is designed for safe and reliable isolation, giving bubble-tight shutoff, with non-rotating, anti-galling tip and dynamic self-adjusting spindle seal to give long service life in a variety of service conditions.

Oliver Valves H33, Flange x Flange,  type 3-valve manifold is designed for direct mounting to differential pressure transmitters, with separate isolation for LP and HP inlets plus equalising valve for simple calibration.

The H33 type 3-valve manifold is supplied as standard with a non-rotating tip to allow linear closure while eliminating galling.

Oliver Valves’ standard H33 type 3-valve manifold valves are rated to 413bar (6,000psi). Standard Temperature range from 240 Deg C up to 540 Deg C.

All NPT connection threads are Single Point CNC machined.

All Oliver products have material traceability and pressure test certificates to BS EN 10204 3.1. A unique code is stamped on all valve bodies linking them to their material and chemical analysis certificates.

Tips are ‘interchangeable’ without special tools or spindle changes in options of hard, soft and metering tips.

Safety ‘“ spindles are ‘back seating’ and ‘anti-blowout’ as standard, a major safety feature. Also, the H33 Needle Valve Manifold has an ‘anti-removable’ steel pin that fits into the body so that the head unit cannot be inadvertently removed.

Dust cap protects the lubricated spindle threads from ingress of dirt and is colour coded for particular service.

Refer to the datasheet for full details

Valve manifolds reduce plant energy consumption and associated costs; another significant benefit throughout many industries. If you would like more information about our valve manifolds, please contact Oliver Valves today.

The ‘Y53’ Type 5 valve manifolds are designed for direct mounting to differential pressure transmitters, with separate isolation and vent for LP and HP inlets, plus equalising valve for simple calibration. Each needle valve head is designed for safe and reliable isolation, giving bubble-tight shutoff, with non-rotating, anti-galling tip and dynamic self-adjusting spindle seal to provide a long service life in a variety of service conditions.

Oliver Valves Y53, Threaded x Flange, type 5-valve manifold is designed for direct mounting to differential pressure transmitters, with separate isolation for LP and HP inlets plus equalising valve for simple calibration.

The Y53 type 5-valve manifold is supplied as standard with a non-rotating tip to allow linear closure while eliminating galling.

Oliver Valves’ standard Y53 type 5-valve manifold valves are rated to 413bar (6,000psi) but can be rated at 689bar (10,000psi). Standard Temperature range from 240 Deg C up to 540 Deg C.

All NPT connection threads are Single Point CNC machined.

All Oliver products have material traceability and pressure test certificates to BS EN 10204 3.1 and are controlled by QA procedures approved by ISO 9001. A unique code is stamped on all valve bodies linking them to their material and chemical analysis certificates.

Tips are ‘interchangeable’ without special tools or spindle changes in options of hard, soft and metering tips.

Safety ‘“ spindles are ‘back seating’ and ‘anti-blowout’ as standard, a major safety feature. There is an ‘anti-removable’ steel pin fitted into the manifold body so that the head unit cannot be removed inadvertently.

Dust cap protects spindle threads from ingress of dirt and is colour coded for particular service.

Valve Manifolds from Oliver Valves are designed for static pressure, liquid level, and differential pressure applications within the oil and gas industry. For more information, please get in touch with us today.

The ‘Y54’ Type 5 valve manifolds are designed for remote mounting to differential pressure transmitters, with separate isolation and vent for LP and HP inlets, plus equalising valve for simple calibration. Each needle valve head is designed for safe and reliable isolation, giving bubble-tight shutoff, with non-rotating, anti-galling tip and dynamic self-adjusting spindle seal to give long service life in a variety of service conditions.

Oliver Valves Y54, Threaded x Threaded, type 5-valve manifold is designed for remote mounting to differential pressure transmitters, with separate isolation for LP and HP inlets plus equalising valve for simple calibration.

The Y54 type 5-valve manifold is supplied as standard with a non-rotating tip to allow linear closure while eliminating galling.

The Oliver Valves’ standard Y54 type 5-valve manifold valve is rated at 413bar (6,000psi) but can be rated at 689bar (10,000psi). With a standard Temperature range from 240 Deg C up to 540 Deg C, the Needle Valve Manifold is suitable for a range of applications within the oil and gas industry.

All NPT connection threads are Single Point CNC machined.

All Oliver products have material traceability and pressure test certificates to BS EN 10204 3.1. A unique code is stamped on all valve bodies linking them to their material and chemical analysis certificates.

Tips are ‘interchangeable’ without special tools or spindle changes in options of hard, soft and metering tips.

Safety ‘“ spindles are ‘back seating’ and ‘anti-blowout’ as standard, a major safety feature. The manifold design includes an ‘anti-removable’ steel pin that fits into the manifold body so the head unit cannot be inadvertently removed.

Dust cap protects spindle threads from ingress of dirt and is colour coded for particular service.

If you would like more information about our valve manifolds, please contact Oliver Valves today.