Y24 Needle Valve Manifold

Close up of a Y24 Needle Valve Manifold

Manifolds

Y24 Needle Valve Manifold

The ‘Y24’ Type 2-valve manifold is designed for direct mounting to static pressure transmitters. The separate vent valve gives full control of venting of the instrument, plus the ability to calibrate in-situ.

Product Information

  • The ‘Y24’ Type 2-valve manifold is designed for direct mounting to static pressure transmitters. The separate vent valve gives full control of venting of the instrument, plus the ability to calibrate in-situ. Each needle valve head is designed for safe and reliable isolation, giving bubble-tight shutoff, with non-rotating, anti-galling tips and dynamic self-adjusting spindle seals to give long service life in a variety of service conditions.

    Oliver Valves Y24, Threaded x Flange,  type 2-valve manifold is designed for direct mounting to differential pressure transmitters, with separate isolation for LP and HP inlets plus equalising valve for simple calibration.

    The Y24 type 2-valve manifold is supplied as standard with a non-rotating tip to allow linear closure while eliminating galling.

    Oliver Valves’ standard Y24 type 2-valve manifolds are rated to 413bar (6,000psi) but can be rated at 689bar (10,000psi). Standard Temperature range from 240 Deg C up to 540 Deg C.

    All NPT connection threads are Single Point CNC machined.

    All Oliver products have material traceability and pressure test certificates to BS EN 10204 3.1. A unique code is stamped on all valve bodies linking them to their material and chemical analysis certificates.

    Tips are ‘interchangeable’ without special tools or spindle changes in options of hard, soft and metering tips.

    Safety ‘“ spindles are ‘back seating’ and ‘anti-blowout’ as standard, a major safety feature. Ananti-removable’ steel pin has been fitted to the valve body so that head unit cannot be removed inadvertently.

    Dust cap protects spindle threads from ingress of dirt and is colour coded for particular service.

    Refer to the data sheet for full details

    Quality assurance is critical to the team at Oliver Valves and how we complete our processes, as our valve solutions are internationally recognised.

Product Enquiry

If you would like more information regarding our needle valves, please fill out the form below, or contact us directly on +44 (0) 1565 632 636 or sales@valves.co.uk.

Product Enquiry Form
Checkboxes

Related Products

Y25 Needle Valve Manifold

Close up of a Y25 Needle Valve Manifold

Manifolds

Y25 Needle Valve Manifold

The ‘Y25’ Type 2-valve manifold is designed for direct mounting to static pressure transmitters. The separate vent valve gives full control of venting of the instrument, plus the ability to calibrate in-situ.

Product Information

  • The ‘Y25’ Type 2-valve manifold is designed for direct mounting to static pressure transmitters. The separate vent valve gives full control of venting of the instrument, plus the ability to calibrate in-situ. Each needle valve head is designed for safe and reliable isolation, giving bubble-tight shutoff, with non-rotating, anti-galling tip and dynamic self-adjusting spindle seal to give long service life in a variety of service conditions.

    Oliver Valves Y25, Flange x Flange, type 2-valve manifold is designed for direct mounting to differential pressure transmitters, with separate isolation for LP and HP inlets plus equalising valve for simple calibration.

    The Y25 type 2-valve manifold is supplied as standard with a non-rotating tip to allow linear closure while eliminating galling.

    Oliver Valves’ standard  Y25 type 2-valve manifolds valves are rated to 413bar (6,000psi) but can be rated at 689bar (10,000psi). Standard Temperature range from 240 Deg C up to 540 Deg C.

    All NPT connection threads are Single Point CNC machined.

    All Oliver Valves products have material traceability and pressure test certificates to BS EN 10204 3.1. A unique code is stamped on all valve bodies linking them to their material and chemical analysis certificates.

    Tips are ‘interchangeable’ on the needle valve manifold without the need for special tools or spindle changes in options of hard, soft and metering tips.

    Safety ‘“ spindles are ‘back seating’ and ‘anti-blowout’ as standard, a major safety feature. Also, an ‘anti-removable’ steel pin is fitted into the body so that the head unit cannot be removed inadvertently.

    The dust cap protects spindle threads from ingress of dirt and is colour coded for particular services.

    Refer to the data sheet for full details

    Our team are pioneering new technology and engineering bespoke valve solutions. If you would like more information about the valve manifolds we supply, please contact Oliver Valves today.

Product Enquiry

If you would like more information regarding our needle valves, please fill out the form below, or contact us directly on +44 (0) 1565 632 636 or sales@valves.co.uk.

Product Enquiry Form
Checkboxes

Related Products

Y33 Needle Valve Manifold

Y33 Needle Valve Manifold

Manifolds

Y33 Needle Valve Manifold

The ‘Y33’ Type 3 valve manifolds are designed for remote mounting to differential pressure transmitters, with separate isolation for LP and HP inlets plus equalising valve for simple calibration.

Product Information

  • The ‘Y33’ Type 3 valve manifolds are designed for remote mounting to differential pressure transmitters, with separate isolation for LP and HP inlets plus equalising valve for simple calibration. Each needle valve head is designed for safe and reliable isolation, giving bubble-tight shutoff, with non-rotating, anti-galling tips and dynamic self-adjusting spindle seals to give long service life in a variety of service conditions.

    The Oliver Valves Y33, Threaded x Threaded, type 3-valve manifold is designed for remote mounting to differential pressure transmitters, with separate isolation for LP and HP inlets plus equalising valve for simple calibration.

    The Y33 type 3-valve manifold is supplied as standard with a non-rotating tip to allow linear closure while eliminating galling.

    Oliver Valves’ standard Y33 type 3-valve manifold valves are rated to 413bar (6,000psi) but can be rated at 689bar (10,000psi). Standard Temperature range from 240 Deg C up to 540 Deg C.

    All NPT connection threads are Single Point CNC machined. All products developed by our team at Oliver Valves’have material traceability and pressure test certificates to BS EN 10204 3.1. A unique code is stamped on all valve bodies linking them to their material and chemical analysis certificates.

    Tips are ‘interchangeable’ without special tools or spindle changes in options of hard, soft and metering tips.

    Safety ‘“ spindles are ‘back seating’ and ‘anti-blowout’ as standard, a major safety feature. Also, an ‘anti-removable’ steel pin is fitted into the body so that the head unit cannot be removed inadvertently.

    Dust cap protects the lubricated spindle threads from ingress of dirt and the caps are colour coded for particular service. The Oliver Valves manifolds have stainless steel colour coded identity tags affixed to individual valve head units.

    Specialising primarily in the Oil, Gas and Petrochemical industries, the Oliver Valves Valve Manifolds can be used in various applications. Get in touch with us today for more information.

Product Enquiry

If you would like more information regarding our needle valves, please fill out the form below, or contact us directly on +44 (0) 1565 632 636 or sales@valves.co.uk.

Product Enquiry Form
Checkboxes

Related Products

YV33 Needle Valve Manifold

Close up of a Y34 Needle Valve Manifold

Manifolds

YV33 Needle Valve Manifold

The ‘YV33’ Type 3 valve manifolds are designed for remote mounting to differential pressure transmitters, with separate isolation for LP and HP inlets plus equalising valve for simple calibration.

Product Information

  • The ‘YV33’ Type 3 valve manifolds are designed for remote mounting to differential pressure transmitters, with separate isolation for LP and HP inlets plus equalising valve for simple calibration. Each needle valve head is designed for safe and reliable isolation, giving bubble-tight shutoff, with non-rotating, anti-galling tip and dynamic self-adjusting spindle seal to give long service life in a variety of service conditions.

    Oliver Valves YV33, Threaded x Threaded, type 3-valve manifold is designed for remote mounting to differential pressure transmitters, with separate isolation for LP and HP inlets plus equalising valve for simple calibration, while providing the option to vent to atmosphere.

    The YV33 type 3-valve manifold is supplied as standard with a non-rotating tip to allow linear closure while eliminating galling.

    Oliver Valves’ standard YV33 type 3-valve manifold valves are rated to 413bar (6,000psi) but can be rated at 689bar (10,000psi). Standard Temperature range from 240 Deg C up to 540 Deg C.

    All NPT connection threads are Single Point CNC machined.

    Products that Oliver Valves have developed have material traceability and pressure test certificates to BS EN 10204 3.1. A unique code is stamped on all valve bodies linking them to their material and chemical analysis certificates.

    Tips are ‘interchangeable’ without special tools or spindle changes in options of hard, soft and metering tips.

    Safety ‘“ spindles are ‘back seating’ and ‘anti-blowout’ as standard, a significant safety feature. Also, an ‘anti-removable’ steel pin is fitted into the manifold body to prevent the head unit from being removed inadvertently.

    The dust cap protects spindle threads from ingress of dirt and the needle valve manifold’s cap is colour coded to show the type of service condition.

    The team at Oliver Valves have invested time and effort into the research and development surrounding the Needle Valve Manifolds to achieve the required results when testing for extreme applications.

Product Enquiry

If you would like more information regarding our needle valves, please fill out the form below, or contact us directly on +44 (0) 1565 632 636 or sales@valves.co.uk.

Product Enquiry Form
Checkboxes

Related Products

Y34 Needle Valve Manifold

Y34 Needle Valve Manifold

Manifolds

Y34 Needle Valve Manifold

The ‘Y34’ Type 3 valve manifolds are designed for direct mounting to differential pressure transmitters, with separate isolation for LP and HP inlets plus equalising valve for simple calibration.

Product Information

  • The ‘Y34’ Type 3 valve manifolds are designed for direct mounting to differential pressure transmitters, with separate isolation for LP and HP inlets plus equalising valve for simple calibration. Each needle valve head is designed for safe and reliable isolation, giving bubble-tight shutoff, with non-rotating, anti-galling tip and dynamic self-adjusting spindle seal. This allows for the valve manifold to be used with a long service life in various service conditions.

    Oliver Valves Y34, Threaded x Flange, type 3-valve manifold is designed for direct mounting to differential pressure transmitters, with separate isolation for LP and HP inlets plus equalising valve for simple calibration.

    The Y34 type 3-valve manifold is supplied as standard with a non-rotating tip to allow linear closure while eliminating galling. Within the Y34 Needle Valve Manifold design, there are steam trace blocks bolted directly to the manifold as they are not an integral part of the component.

    Oliver Valves’ standard Y34 type 3-valve manifold valves are rated 413bar (6,000psi) but can be rated at 689bar (10,000psi). Standard Temperature range from 240 Deg C up to 540 Deg C.

    All NPT connection threads are Single Point CNC machined.

    All Oliver products have material traceability and pressure test certificates to BS EN 10204 3.1. A unique code is stamped on all valve bodies linking them to their material and chemical analysis certificates.

    Tips are ‘interchangeable’ without special tools or spindle changes in options of hard, soft and metering tips.

    Safety ‘“ spindles are ‘back seating’ and ‘anti-blowout’ as standard, a major safety feature. Also, an ‘anti-removable’ steel pin is fitted into the body so that the head unit cannot be removed inadvertently.

    Dust cap protects spindle threads from ingress of dirt and is colour coded for particular service.

    Please contact Oliver Valves today if you want more information about the Needle Valve Manifolds we supply.

Product Enquiry

If you would like more information regarding our needle valves, please fill out the form below, or contact us directly on +44 (0) 1565 632 636 or sales@valves.co.uk.

Product Enquiry Form
Checkboxes

Related Products

YV34 Needle Valve Manifold

YV34 Needle Valve Manifold

Manifolds

YV34 Needle Valve Manifold

The ‘YV34’ Type 3 valve manifolds are designed for direct mounting to differential pressure transmitters, with separate isolation for LP and HP inlets plus equalising valve for simple calibration.

Product Information

  • The YV34 type 3-valve manifold is standard with a non-rotating tip to allow linear closure while eliminating galling.

    Oliver Valves’ standard YV34 type 3-valve manifold valves are rated 413bar (6,000psi) but can be rated at 689bar (10,000psi). Standard Temperature range from 240 Deg C up to 540 Deg C.

    All NPT connection threads are Single Point CNC machined.

    All Oliver products have material traceability and pressure test certificates to BS EN 10204 3.1. A unique code is stamped on all valve bodies linking them to their material and chemical analysis certificates.

    Tips are ‘interchangeable’ without special tools or spindle changes in options of hard, soft and metering tips.

    Safety ‘“ spindles are ‘back seating’ and ‘anti-blowout’ as standard, a major safety feature that we have included within the design. Also, an ‘anti-removable’ steel pin is fitted into the manifold body to prevent the head unit from being removed inadvertently.

    Included is a dust cap that protects the lubricated spindle threads from ingress of dirt and is colour coded for particular services.

    Valve manifolds afford more efficient system operations in comparison to opening and closing each valve independently. For more information, get in touch with Oliver Valves today.

Product Enquiry

If you would like more information regarding our needle valves, please fill out the form below, or contact us directly on +44 (0) 1565 632 636 or sales@valves.co.uk.

Product Enquiry Form
Checkboxes

Related Products